dmv gc logo
Get Free Estimate
Chat with us!
📍 Serving Washington, DC & Montgomery County

Licensed Plumbing Services in Washington, DC

🔧 Residential Plumbing Specialists⭐ 4.9 Rating · 97+ Reviews✓ MHIC Licensed & Insured✓ Licensed Plumbers on Staff✓ Permit & Inspection Coordination✓ Free Plumbing Estimate

Washington, DC Plumbing & Permit Note: Certain Washington, DC properties are served by the City of Washington, DC water and sewer system, while others are served by DC Department of Buildings (DOB). Plumbing permit and inspection requirements therefore depend on the property and project. We coordinate the applicable permit and inspection steps rather than leaving homeowners to navigate the process themselves.

Looking for a trusted plumber in Washington, DC? DMV General Contracting Group provides comprehensive residential plumbing services throughout Washington, DC and Montgomery County — from water heater replacement and whole-home repiping to bathroom and kitchen plumbing, sump pumps, fixture installation, water filtration and remodel rough-ins. Our team focuses on code-conscious installation, clear project communication, protection of your home and complete testing before the job is closed.
Licensed & Insured
In-House Plumbing Team
Permit Coordination
Free Written Estimates

Plumbing Services We Offer in Washington, DC

🔥 Water Heater Services

  • Gas & electric tank replacement
  • Tankless water heaters
  • Heat pump water heaters
  • Expansion tanks
  • Water heater relocation

🔧 Repiping & Pipe Replacement

  • Whole-home PEX repiping
  • Copper repiping
  • Galvanized pipe replacement
  • Polybutylene replacement
  • Localized pipe repairs

🚿 Bathroom & Kitchen Plumbing

  • Bathroom rough-in & finish
  • Shower and tub valves
  • Toilet rough-in & relocation
  • Kitchen sink & faucet connections
  • Remodel plumbing coordination

💧 Drainage & Pump Systems

  • Sump pump installation
  • Battery backup pumps
  • Sewage ejector pumps
  • Floor drains
  • Basement bathroom plumbing

🛠️ Fixtures & Appliances

  • Toilets, faucets & showerheads
  • Garbage disposals
  • Dishwasher connections
  • Refrigerator ice-maker lines
  • Washer hookups & hose bibs

💎 Water Treatment

  • Whole-home filtration
  • Water softeners
  • Under-sink RO systems
  • Sediment filters
  • Pressure regulators

Whole-Home Repiping in Washington, DC

Older plumbing systems can develop recurring leaks, corrosion, restricted flow and poor water pressure. Our plumbers inspect accessible supply piping to identify the existing material and condition before recommending a solution. When replacement is appropriate, we can install modern PEX or copper supply piping and coordinate necessary wall access and restoration.

Polybutylene pipe warning: Gray plastic polybutylene supply piping can be found in some homes built during the late 20th century. If you see gray plastic water-supply pipes or experience repeated leaks, schedule an assessment before a localized failure becomes a larger water-damage event.

Plumbing Warning Signs in Washington, DC Homes

🟤 Discolored Water

Brown, orange or rusty water can indicate pipe corrosion or water-heater problems and deserves professional evaluation.

📉 Low Water Pressure

Reduced pressure throughout the house can be associated with corrosion, restricted piping or pressure-control issues.

💧 Visible Corrosion

Green staining, mineral deposits or rust on exposed piping may indicate deterioration or an active plumbing issue.

🌊 Recurring Leaks

Repeated leaks in different areas can point to aging plumbing rather than one isolated fitting.

🔊 Banging Pipes

Water hammer, rattling or unusual pipe noise may indicate pressure, support or flow-related problems.

💰 Unexplained Water Bills

A sudden increase in water use can be a warning sign of a hidden leak that needs investigation.

Water Heater Installation & Replacement in Washington, DC

Choosing the right water heater depends on household size, fuel availability, hot-water demand, installation location and long-term efficiency goals. We assess the existing setup and explain the practical options before installation.

Water Heater TypeTypical UseKey Consideration
Gas TankStraightforward replacementExisting gas and venting configuration
Electric TankHomes without gas serviceElectrical capacity and tank size
TanklessOn-demand hot waterFlow demand, gas/electrical requirements and venting
Heat PumpHigh efficiencyAvailable space, electrical service and installation conditions

Plumbing for Washington, DC Bathroom & Kitchen Remodeling

Remodeling often requires more than installing a new fixture. A bathroom or kitchen renovation may involve relocating supply lines, drains, vents, shower valves, toilets, sinks, appliances or specialty fixtures. Our design-build approach allows plumbing work to be coordinated with other trades so rough-in work happens at the correct stage and finished surfaces are protected.

Basement Plumbing & Sump Pump Services in Washington, DC

Finished basements often require reliable drainage and properly designed plumbing for bathrooms, laundry areas, utility rooms and wet bars. We install and replace sump pumps, battery backup systems, sewage ejector pumps and basement plumbing rough-ins based on the home's layout and drainage requirements.

Permit & Inspection Coordination

For properties within the City of Washington, DC, the City provides plumbing trade permits and performs plumbing inspections. Some properties are served by DC Department of Buildings (DOB) instead, in which case DC Department of Buildings (DOB) requirements may apply. We coordinate the applicable permit and inspection steps for the projects we perform and keep documentation organized from application through final testing.

E-E-A-T focus: We do not treat permitting as an afterthought. Before work starts, the project scope is reviewed for the applicable permit/inspection requirements; during installation, the plumbing is tested and documented; and at completion, required inspections are coordinated so the homeowner has a clear record of the work.

Why Choose DMV General Contracting Group for Plumbing in Washington, DC?

Licensed & Insured

DMV General Contracting Group presents itself as a licensed and insured contractor, with licensed plumbers on staff for residential plumbing work.

In-House Coordination

Plumbing can be coordinated with electrical, tile, carpentry and remodeling crews instead of relying on disconnected project schedules.

Clear Estimates

We inspect accessible conditions, explain options and provide a written estimate before proceeding with the work.

Code-Conscious Work

Projects are planned around applicable Maryland, Montgomery County and DC Department of Buildings (DOB) requirements where they apply.

Home Protection

We protect cabinets, walls, flooring and finished surfaces during plumbing access and installation work.

Final Testing

New plumbing is tested for leaks, fixture operation, water flow, drainage and water-heater performance before completion.

Our Plumbing Service Process in Washington, DC

1

Free Plumbing Assessment

We evaluate the existing pipes, fixtures, water heater, drainage and accessible plumbing areas, then discuss your goals and provide a written estimate.

2

Scope & Permit Review

We determine the work required and coordinate applicable permit and inspection requirements for the Washington, DC/Montgomery County service area.

3

Professional Installation

Our plumbing team completes the approved work while protecting finished areas and coordinating access with other trades when needed.

4

Inspection & Corrections

Where inspections are required, we coordinate scheduling and respond to applicable inspector comments.

5

Testing & Homeowner Walkthrough

We check connections for leaks, verify fixture and water-heater operation, confirm drainage and review the completed work with you.

Serving Washington, DC and Nearby Communities

Washington, DCNorth BethesdaBethesdaCabin JohnGarrett ParkKensingtonGaithersburgPotomac

Frequently Asked Questions — Plumbing Services in Washington, DC

We provide water heater installation and replacement, whole-home repiping, pipe replacement, bathroom and kitchen plumbing, sump and sewage ejector pumps, fixtures and appliance connections, water filtration and remodel plumbing.

We coordinate applicable permits and inspections for the plumbing projects we perform. Washington, DC plumbing requirements depend on the property's water/sewer service provider and the scope of work. The City of Washington, DC has its own plumbing permit process, while DC Department of Buildings (DOB) requirements apply to properties it serves.

Yes. We assess accessible piping and can perform partial repairs or whole-home repiping with modern PEX or copper when replacement is appropriate.

Yes. Our plumbing team can handle rough-in and finish plumbing and coordinate with the other renovation trades.

Recurring leaks, widespread corrosion, low pressure, deteriorating pipe material and repeated repairs can indicate a larger system issue. We inspect the accessible system and explain whether localized repair or repiping makes more sense.

Yes. We install multiple water-heating options and evaluate the home's fuel type, electrical capacity, available space and hot-water demand before recommending a system.

Get a Free Plumbing Assessment for Your Washington, DC Home

Tell us what is happening with your plumbing system, water heater, pipes, drainage or remodel. We'll assess the project, explain your options and provide a clear estimate.

Schedule Free Plumbing Assessment →📞 Call 240.730.1292