
DMV General Contracting Group handles residential drywall from installation through final preparation for paint, tile or another finish.
Walls and ceilings for additions, basements, room partitions and new construction.
Professional board installation, joint taping, compound application and sanding.
Finish levels selected according to the room, lighting and final paint requirements.
Smooth resurfacing for dated texture, widespread minor imperfections and premium finishes.
Removal and replacement of stained, sagging or compromised drywall after the moisture source is addressed.
Repairs for nail pops, impact holes, access cuts, settling cracks and damaged corners.
Installation and repair for flat and specialty ceilings.
Removal and replacement with a smooth or specified finish, with appropriate testing considerations for older materials.
Appropriate board selection for bathrooms, basements and other higher-moisture areas.
Tile-ready substrate for shower, tub and other wet-area applications.
Drywall patching after plumbing, electrical or HVAC access work.
Blending repaired areas with the surrounding wall or ceiling texture.
The finish level determines how smooth and paint-ready the surface will be. Choosing the right level helps avoid visible seams, joints and surface variations after painting.
| Level | Description | Best Used For |
|---|---|---|
| Level 0 | No taping or finishing. | Temporary or concealed installations. |
| Level 1 | Tape embedded in joint compound. | Concealed spaces and certain fire-rated assemblies. |
| Level 2 | Tape plus one coat of compound. | Garages, utility areas and heavy-texture applications. |
| Level 3 | Tape plus two coats of compound. | Areas receiving heavier texture. |
| Level 4 | Three coats, sanded smooth and fasteners filled. | Most living spaces with flat, eggshell or satin paint. |
| Level 5 | Full skim coat over a Level 4 surface. | Premium spaces, strong raking light and higher-sheen finishes. |
| Drywall Type | Key Feature | Typical Application |
|---|---|---|
| Standard Drywall | General-purpose wall and ceiling board. | Bedrooms, living rooms, hallways and offices. |
| Moisture-Resistant Board | Higher moisture tolerance. | Bathrooms, laundry areas and suitable basement locations. |
| Cement Board | Durable tile-ready substrate. | Shower surrounds, tub walls and wet-area tile backing. |
| Fire-Rated Type X | Fire-resistant assembly component. | Garages, utility areas and locations where required. |
| Sound-Dampening | Designed to reduce sound transmission. | Home offices, bedrooms, media rooms and party walls. |
| Lightweight Drywall | Lower weight than standard board. | Ceilings and projects where reduced handling weight is useful. |
| Flexible Drywall | Can accommodate curved surfaces. | Arched openings, curved walls and radius details. |
Fill, sand and finish minor holes, fastener pops and surface blemishes so repairs blend with the surrounding surface.
Access openings from plumbing, electrical or cable work can be backed, patched, taped, mudded and texture matched.
Damaged sections can be replaced between framing members, then taped, finished and blended.
Settling cracks, corner-bead separation and joint cracking are repaired rather than simply painted over.
Stained, sagging or crumbling drywall is removed after the underlying moisture source is addressed.
Compromised drywall can be removed and replaced as part of an appropriately coordinated moisture and remediation process.
Water-damaged drywall can result from plumbing leaks, roof leaks, HVAC condensation or bathroom-related moisture. Repair should address the cause before the wall or ceiling is closed again.
Skim coating applies a thin layer of joint compound over an existing surface to create a smoother, more uniform wall or ceiling. It can be useful when existing texture is dated, when minor widespread surface imperfections need to be corrected, or when a premium smooth finish is desired without replacing every sheet of drywall.
DMV General Contracting Group can coordinate popcorn ceiling removal and replacement with a smooth or specified finish. Older textured ceiling materials may contain asbestos, so suspect materials should be tested and handled according to applicable requirements before sanding, scraping or removal.
| Project Type | Drywall Work Typically Involved |
|---|---|
| Kitchen Remodel | Layout-wall changes, backsplash backer, patching after electrical/plumbing work and paint-ready finishing. |
| Bathroom Renovation | Moisture-appropriate board, cement board in tile areas, ceiling work and fixture-change patching. |
| Basement Finishing | Walls and ceilings, appropriate board selection, bathroom cement board and required fire-rated assemblies. |
| Home Addition | Complete new drywall installation and blending with the existing home's finish. |
| Open-Concept Conversion | Ceiling and wall patching after wall removal plus texture and finish blending. |
| Whole-Home Renovation | Skim coating, trade-access patching, finish-level selection and uniform paint-ready surfaces. |
Drywall pricing varies by project size and conditions. The final estimate can be affected by surface area, ceiling height, access, demolition, board type, finish level, texture matching, water damage, framing repairs and coordination with other trades.
| Cost Factor | What Can Change the Price |
|---|---|
| Project Size | More wall and ceiling square footage generally increases labor and material requirements. |
| Repair Complexity | Small patches differ from large section replacement or multi-room repairs. |
| Finish Level | Level 5 and extensive skim coating require additional material, labor and surface preparation. |
| Ceiling Work | Overhead installation and repair can require additional labor and handling. |
| Specialty Board | Moisture-resistant, cement board, fire-rated and sound-dampening systems can change material requirements. |
| Water Damage | Removal, drying, framing inspection and coordination with the source repair can expand the scope. |
| Texture Matching | Matching an existing texture may require additional finishing and blending. |
Repairs are finished to blend with surrounding wall and ceiling surfaces.
Drywall can be coordinated with plumbing, electrical, HVAC, carpentry and painting.
Maryland MHIC #156178, insured, with a 1-year workmanship warranty.
4.9 rating with 97+ reviews listed by DMV General Contracting Group.
For remodeling work, the team can coordinate project sequencing and permit-related steps as part of its design-build workflow.
Surfaces are prepared for the specified final finish rather than leaving visible seams or rough transitions.
Review the drywall scope, measure surfaces, identify repair conditions and determine any special board or finish requirements.
For remodeling projects, drywall is sequenced after required plumbing, electrical and HVAC rough-in work and related inspections.
Sheets are cut and installed using the appropriate board type and fastening approach for the project.
Joints, corners and fasteners are finished through the required sequence of compound coats.
Surfaces are sanded and, where specified, skim coated to achieve the selected finish level.
Final surfaces are inspected and prepared for primer and paint, or handed off to the next trade.